Unpack the Cisco Nexus 5548

Installing an HCP RAIN System - Final On-Site Setup

File Size
35463 KB
Part Number

Locate the following items in the switch container:

  • Cisco Nexus 5548 switch
  • 2 slider rails
  • 2 rear switch mounting brackets
  • 2 port side mounting ears
  • 12 M4 x 0.7 x 8-mm Phillips countersunk screws

Supply the following items (per switch):

  • Eight M5 screws
  • Eight M5 caged nuts
  1. Locate a single 10G SFP+ to 1G RJ-45 adapter module, Cisco part number GLC-T=.P.
  2. Set the required items aside in an easy-to-reach location.
  3. Leave the unused items in the switch container, and set the container aside.
    The rest of the items included in the switch container are not necessary for installation. You don't need the original power cords for the switches.

    Do not discard additional items. Pack them together and set them aside.