Install port expansion modules in Cisco Nexus 5548 switch

Installing an HCP RAIN System - Final On-Site Setup

Version

9.7.x

File Size

35463 KB

Audience

anonymous

Part Number

MK-98ARC016-35

If the system is ordered with more than 28 nodes, the switches arrive with 16 port expansion modules. Optionally, to install the expansion modules in both switches:

Locate the boxes containing the 16 port Universal Port Expansion modules.
Unscrew the dummy plate from the front of the Cisco Nexus 5548UP 10G Ethernet switch with a Philips screwdriver.
Release the dummy plate locking lever.
Carefully install the Port Expansion module.
Align the module in the switch and lock the lever into place.
Screw the module in place using the screw attached to the lever.
Do not over-tighten.
Repeat steps one through five for the 16 port expansion module in the second Cisco Nexus 5548UP switch.