Unpack the Cisco N3K and N9K

Installing an HCP RAIN System - Final On-Site Setup

File Size
35463 KB
Part Number

Locate the following items in the switch container:

  • Cisco N3K or N9K switch
  • 2 front rack-mount brackets
  • 2 rear rack-mount brackets
  • 2 slider rails
  • 12 M4 x 0.7 x 8-mm Phillips countersunk screws

Supply the following items (per switch):

  • Eight 10-32 or 12-24
  • Grounding cable
  • (Optional) Level tool or tape measure
  1. Set the required items aside in an easy-to-reach location.
  2. Leave the unused items in the switch container, and set the container aside.
    The rest of the items included in the switch container are not necessary for installation. You don't need the original power cords for the switches.

    Do not discard additional items. Pack them together and set them aside.