Unpack the Brocade VDX 6740

Installing an HCP RAIN System - Final On-Site Setup
Version
9.7.x
File Size
35463 KB
Audience
anonymous
Part Number
MK-98ARC016-35

Locate the following items in the switch container:

  • Brocade VDX 6740 switch
  • Serial cable for Brocade switches

Supply the following items (per switch):

  • Eight M5 caged nuts
  • Eight M5 screws
  1. Locate the four-post fixed rack mount kit (24 inch-32 inch), containing the items shown in the following figure.


    1 Bracket; front right
    2 Bracket; front left
    3 Bracket; rear left
    4 Bracket; rear right
    5 Screw; 8-32 x 5/16-in, panhead Phillips
    6 Screw; 6-32 x 1/4-in, flathead Phillips
    7 Screw; 10-32 x 5/8-in, panhead Phillips
    8 Retainer nut; 10-32
  2. Locate a single 10G SFP+ to 1G RJ-45 adapter module, Brocade part number XBR-000190.P.
  3. Set the required items aside in an easy-to-reach location.
  4. Leave the unused items in the switch container, and set the container aside.
    The rest of the items included in the switch container are not necessary for installation. You don't need the original power cords for the switches.

    Do not discard additional items. Pack them together and set them aside.