Install the Brocade VDX 6740 rails

Installing an HCP RAIN System - Final On-Site Setup

Version
9.7.x
File Size
35463 KB
Audience
anonymous
Part Number
MK-98ARC016-35
  1. Position the front right bracket with the flat side against the right side of the switch. Make sure the back half of the rail is detached.


    1 Bracket; front right
    5 Screw; 8-32 x 5/16-in, panhead Phillips
  2. Screw five 8-32 x 5/16-inch screws into the holes in the bracket.


  3. Repeat the previous steps to attach the front left bracket to the left side of the switch.
  4. Tighten all of the 8-32 x 5/16-inch screws to a torque of 15 in-lbs. (17 cm-kgs).