Attach mounting brackets to the chassis

Installing an HCP RAIN System - Final On-Site Setup

Version

9.7.x

File Size

35463 KB

Audience

anonymous

Part Number

MK-98ARC016-35

This procedure describes how to attach mounting brackets to the switch chassis. The following figure shows the front bracket alignment for mounting the switch into a four-post rack.

Align the mounting brackets with the attachment pins to obtain the desired mounting position.
Place the bracket flush on the chassis with attachment pins protruding through key-openings.
Slide the bracket toward the front flange until the bracket clip locks with an audible click.
To remove the mounting bracket from the chassis, lift the front edge of the mounting bracket clip with a flathead screwdriver and slide the bracket away from the front flange (opposite from the installation direction).