The tenant log contains messages about events that happen at the tenant and namespace levels. The table in this appendix lists the messages HCP can write to the tenant log. The messages are listed in order by event ID.
| ID | Event | Explanation | Action | Severity |
|---|---|---|---|---|
|
2005 |
HCP found an unavailable object |
HCP could not repair an object because the object was unavailable. |
Contact your HCP system administrator. |
Warning |
|
2006 |
HCP found an irreparable object |
HCP found a broken object it could not repair. |
Contact your HCP system administrator. |
Error |
2028 |
HCP found an irreparable object |
HCP was unable to repair the object. The repair may be retried at a later time. |
Contact your HCP system administrator. |
Error |
2044 |
HCP found an unavailable object |
HCP could not repair an object because the object was unavailable. |
Contact your HCP system administrator. |
Warning |
2046 |
HCP found an irreparable object |
HCP found a broken object it could not repair. |
Contact your HCP system administrator. |
Error |
2070 |
Object has been shredded |
An object was shredded. |
No action is required. |
Notice |
2087 |
Disposition service stopped: run complete |
The Disposition service finished successfully. |
No action is required. |
Notice |
2088 |
Disposition service stopped without finishing |
The Disposition service stopped without completing its run. The service will resume at some point in the future. |
No action is required. |
Warning |
2089 |
Disposition service stopped: run complete |
The Disposition service finished successfully. |
No action is required. |
Notice |
2090 |
Disposition service stopped without finishing |
The Disposition service stopped without completing its run. The service will resume at some point in the future. |
No action is required. |
Warning |
2092 |
Disposition service stopped without finishing |
The Disposition service stopped without completing its run. The service will resume at some point in the future. |
No action is required. |
Notice |
2093 |
Disposition service stopped without finishing |
The DIsposition service stopped without completing its run. The service will resume at some point in the future. |
No action is required. |
Notice |
2154 |
Additional namespaces included in tenant replication |
The indicated namespaces were selected to be included in replication of the tenant. |
No action is required. |
Notice |
2155 |
One or more namespaces removed from tenant replication |
The indicated namespaces were removed from replication of the tenant. |
No action is required. |
Notice |
2156 |
Replication automatically paused for this tenant |
Replication of the tenant was automatically paused for the indicated reason. |
If the cause is one or more namespace name collisions, rename each indicated namespace. If the cause is that the replica does not support the DPL of one or more namespaces, lower the DPL of each indicated namespace. Alternatively, in either case, you can deselect the namespace from being replicated. After you make the necessary changes, notify your HCP system administrator that the problem has been resolved. |
Error |
2157 |
Namespace replication collision detected |
A namespace replication collision was detected, possibly requiring intervention from the tenant administrator. |
If the cause is one or more namespace name collisions, rename each indicated namespace. If the cause is that the replica does not support the DPL of one or more namespaces, lower the DPL of each indicated namespace. Alternatively, in either case, you can deselect the namespace from being replicated. After you make the necessary changes, notify your HCP system administrator that the problem has been resolved. |
Notice |
2160 |
User account replicated with collisions |
Either or both of two user accounts with the same user ID on a 4.x system were modified on that system, resulting in conflicting values for one or more properties. On replication to this system, the values for those properties were taken from the account with roles. |
Ensure that the user account is configured correctly. |
Warning |
2343 |
Successfully added Service Principal Name to Active Directory |
HCP successfully added a Service Principal Name to Active Directory. |
No action is required. |
Notice |
2345 |
Failed to add Service Principal Name to Active Directory |
HCP failed to add a Service Principal Name to Active Directory. |
Verify that the Service Principal Name was added to Active Directory. |
Warning |
2347 |
An exception occurred while adding Service Principal Name to Active Directory |
HCP failed to add a Service Principal Name to Active Directory. |
Verify that the Service Principal Name was added to Active Directory. |
Warning |
2351 |
Group account created |
A user created a group account. |
No action is required. |
Notice |
2353 |
Group account updated |
A user updated a group account. |
No action is required. |
Notice |
2355 |
Group account deleted |
A user deleted a group account. |
No action is required. |
Notice |
2396 |
Successfully removed Service Principal Name from the Active Directory |
Successfully removed Service Principal Name from the Active Directory. |
No action is required. |
Notice |
2398 |
Failed to remove Service Principal Name from the Active Directory |
Failed to remove Service Principal Name from the Active Directory. |
Verify that Active Directory Service Principal Name is cleaned up. |
Warning |
| 2637 | Syslog disabled for a tenant. | Syslog has been disabled for a tenant. | No action is required | Notice |
| 2638 | Syslog enabled for a tenant. | Syslog has been enabled for a tenant. | No action is required | Notice |
2900 |
Privileged delete requested |
A user requested a privileged delete operation. |
No action is required. |
Notice |
2901 |
Privileged delete succeeded |
A privileged delete operation succeeded. |
No action is required. |
Notice |
2902 |
Privileged delete failed |
A privileged delete operation failed. |
No action is required. |
Notice |
2903 |
Retention class created |
A user created a retention class. |
No action is required. |
Notice |
2904 |
Retention class updated |
A user updated a retention class. |
No action is required. |
Notice |
2905 |
Retention class deleted |
A user deleted a retention class. |
No action is required. |
Notice |
2906 |
Retention mode set |
The namespace retention mode has been changed. |
No action is required. |
Notice |
2907 |
Privileged purge requested |
A user requested a privileged purge operation. |
No action is required. |
Notice |
2908 |
Privileged purge succeeded |
A privileged purge operation succeeded. |
No action is required. |
Notice |
2909 |
Privileged purge failed |
A privileged purge operation failed. |
No action is required. |
Notice |
2911 |
Retention class missing |
HCP system detected a missing retention class. |
Contact your HCP system administrator. |
Error |
|
2912 |
Privileged delete failed |
A user updated Minimum Retention after Initial Unspecified setting. |
No action is required. |
Notice |
3004 |
Namespace created |
A user created a namespace. |
No action is required. |
Notice |
3005 |
Namespace updated |
A user updated a namespace. |
No action is required. |
Notice |
3006 |
Namespace deleted |
A user deleted a namespace. |
No action is required. |
Notice |
3011 |
User account created |
A user created a user account. |
No action is required. |
Notice |
3012 |
User account updated |
A user updated a user account. |
No action is required. |
Notice |
3013 |
User account deleted. |
A user deleted a user account. |
No action is required. |
Notice |
3014 |
User account is disabled |
A user tried to log in with a disabled user account. |
Reenable the user account to allow the user to log in. |
Warning |
3015 |
User account disabled. |
A user account has been disabled. |
No action is required. |
Notice |
3016 |
User account enabled |
A user account has been enabled. |
No action is required. |
Notice |
3017 |
User account password changed |
A user changed the password for a user account. |
No action is required. |
Notice |
3018 |
User account failed login |
A user tried to log in with a username and password that are not valid for any user account. |
Have the user log in with a username and password that are valid for a user account. |
Warning |
3019 |
Failed login to the Search Console |
A user tried to log into the Search Console with a username and password that are not valid for any user account. |
Have the user log into the Search Console with a username and password for that are valid for a user account. |
Warning |
3020 |
Namespace over hard quota |
The amount of storage used by the namespace exceeds the configured hard quota. |
Delete some objects from the namespace or increase the hard quota. |
Warning |
3021 |
Namespace under hard quota |
The amount of storage used by the namespace is under the configured hard quota |
No action is required. |
Warning |
3022 |
Namespace over soft quota |
The amount of storage used by the namespace exceeds the configured soft quota. |
Consider deleting some objects from the namespace or increasing the hard quota for the namespace. |
Warning |
3023 |
Namespace under soft quota |
The amount of storage used by the namespace is under the configured soft quota. |
No action is required. |
Warning |
3024 |
Tenant over soft quota |
The amount of storage used by all namespaces owned by the tenant exceeds the soft quota configured for the tenant. |
Consider deleting some objects from the namespaces or requesting an increase in the hard quota for the tenant. |
Warning |
3025 |
Tenant under soft quota |
The amount of storage used by all namespaces owned by the tenant is under the soft quota configured for the tenant. |
No action is required. |
Warning |
3028 |
Failed user account login attempt |
An attempt to log into a tenant failed because the user account could not be authenticated. |
No action is required. |
Warning |
3032 |
Tenant at namespace quota |
The number of namespaces is equal to the maximum allowed for this tenant. |
No action is required. |
Warning |
3033 |
Tenant over namespace quota |
The number of namespaces is greater than the maximum allowed for this tenant. |
Either delete one or more namespaces or have your HCP system administrator increase the namespace quota. |
Warning |
3037 |
Username conflict |
Multiple user accounts have the same username. All user accounts must have a unique username. |
Rename one account or merge duplicate accounts together. |
Warning |
3508 |
HCP found an irreparable object |
HCP found a broken object it could not repair. |
Contact your HCP system administrator. |
Error |
3998 |
Search enabled or disabled |
A user enabled or disabled search. |
No action is required. |
Notice |
3999 |
Search indexing enabled or disabled |
A user enabled or disabled search indexing. |
No action is required. |
Notice |
4000 |
HCP search facility indexing failure |
The HCP search facility encountered an object it could not index. |
Contact your HCP system administrator. |
Error |
4002 |
User account created |
A user created a user account. |
No action is required. |
Notice |
4003 |
User account updated |
A user updated a user account. |
No action is required. |
Notice |
4004 |
User account deleted |
A user deleted a user account. |
No action is required. |
Notice |
4005 |
User authenticated |
A user login to the Tenant Management Console was successfully authenticated. |
No action is required. |
Notice |
4006 |
Authentication attempt by unknown user |
A user tried to log in with an unknown username. |
Have the user log in with a valid username and password. |
Warning |
4007 |
Account reenabled by timer |
A disabled security user account has been automatically reenabled. |
No action is required. |
Notice |
4008 |
Account is disabled |
A user tried to log in with a disabled account. |
Reenable the user account to allow the user to log in. |
Warning. |
4009 |
Account has been inactive for too long |
A user tried to log in with an account that was disabled due to inactivity. |
Reenable the user account to allow the user to log in. |
Warning. |
4010 |
Account does not include the required roles |
A user tried to log in with an account that does not include a required role. |
Update the account to include the required role to allow the user to log in. |
Warning. |
4011 |
Password is invalid |
A user tried to log in with an invalid password. |
Have the user log in with a valid username and password. |
Warning. |
4012 |
Remote authentication server error |
The login for a remotely authenticated user failed due to an error communicating with a RADIUS server. |
Contact your HCP system administrator. |
Warning. |
4013 |
Password changed |
A user changed the password for a user account. |
No action is required. |
Notice. |
4014 |
Account enabled |
A user account has been enabled. |
No action is required. |
Notice. |
4015 |
Account disabled |
A user account has been disabled. |
No action is required. |
Notice. |
4016 |
Account disabled due to too many failed logins |
A user account has been automatically disabled due to too many failed login attempts. |
Reenable the user account and have the user log in with a valid username and password. |
Warning |
4017 |
Account will be reenabled |
A security user account will be reenabled automatically after a waiting period. |
No action is required. |
Warning. |
4018 |
User authenticated |
A user login to the Search Console was successfully authenticated. |
No action is required. |
Warning. |
4019 |
Configuration changed |
A user changed a configuration value of an HCP component. |
No action is required. |
Warning. |
4020 |
Configuration changed |
A user changed a configuration value of an HCP component. |
No action is required. |
Warning. |
4021 |
Irreparable object acknowledged |
A user acknowledged an irreparable object. |
No action is required. |
Warning. |
4022 |
All irreparable objects acknowledged |
A user acknowledged all irreparable objects. |
No action is required. |
Warning. |
4023 |
Unauthorized action |
A user has requested an operation that is not authorized for the user account. |
If the user should be allowed to perform this operation, add the required role to the user account. |
Warning |
4024 |
User account created |
A user created a user account. |
No action is required. |
Notice. |
4025 |
User account updated |
A user updated a user account. |
No action is required. |
Notice. |
4026 |
User account deleted |
A user deleted a user account. |
No action is required. |
Notice. |
4027 |
User account is disabled |
A user tried to log in with a disabled user account. |
Reenable the user account to allow the user to log in. |
Warning |
4028 |
User account disabled due to too many failed logins |
A user account has been automatically disabled due to too many failed login attempts. |
Reenable the user account to allow the account user to log in. |
Warning |
4029 |
User account disabled |
A user account has been disabled. |
No action is required. |
Notice. |
4030 |
User account password changed |
A user changed the password for a user account. |
No action is required. |
Notice. |
4031 |
User accounts merged |
A user merged multiple user accounts with the same username into a single account. |
No action is required. |
Notice. |
4100 |
Object replicated with collisions |
An object being replicated conflicts with an existing object on the target system. The object has been stored in the .lost+found directory on the target system. |
No action is required. |
Warning |
4101 |
Object did not replicate |
An object was not replicated. |
Contact your HCP system administrator. |
Error |
4102 |
Object did not replicate; will retry later |
An object was not replicated. Replication of the object will be retried later. |
Monitor the replica to see whether this object is eventually replicated. If the object does not replicate within one week, contact your HCP system administrator. |
Warning. |
4103 |
Failure creating HCP search facility index for a namespace. |
The HCP search facility could not create the index for a namespace. |
No action is required. |
Warning. |
4104 |
Failure deleting HCP search facility index for a namespace. |
The HCP search facility could not delete the index for a namespace. |
No action is required. If this situation persists, contact your authorized service provider. |
Warning. |
4105 |
Failure creating HCP search facility index for a namespace. |
The HCP search facility could not create the index for a namespace but will try again later. |
No action is required. If this situation persists, contact your authorized service provider. |
Warning. |
4114 |
Metadata query engine indexing failure |
The metadata query engine encountered an object it could not index. |
If this situation persists, contact your HCP system administrator. |
Warning. |
4115 |
Metadata query engine checkpoint reset |
A user reset the metadata query engine checkpoint for the indicated namespace. |
No action is required. |
Warning. |
4122 |
Failure adding namespace to the search index. |
The HCP search facility could not create the index for a namespace because the system limit was reached. |
No action is required. If this situation persists, contact your authorized service provider. |
Warning. |
4123 |
Namespace was successfully added to index |
Namespace was added to the index |
No action is required. |
Notice. |
4124 |
Content class created |
A user created a content class. |
No action is required. |
Notice. |
4125 |
Content class updated |
A user updated a content class. |
No action is required. |
Notice. |
4126 |
Content class deleted |
A user deleted a content class. |
No action is required. |
Notice. |
4127 |
Namespaces associated with content class |
A user associated namespaces with a content class. |
No action is required. |
Notice. |
4128 |
Content classes associated with namespace |
A user associated content classes with a namespace. |
No action is required. |
Notice. |
4220 |
Namespace tags updated |
A user updated the tags for a namespace. |
No action is required. |
Notice. |
4225 |
Namespace default settings updated |
A user updated the namespace default settings. |
No action is required. |
Notice. |