HCP with internal storage system architecture

Installing an HCP system

Part Number

The following figure shows the architecture of an HCP system that uses internal storage. This system has four storage nodes, two back-end switches (on the left), and two front-end switches (on the right).

The image shows (4) storage nodes, (2) back-end switches, and (2) front-end switches

The following table describes the cables in this figure.
Cable Connects from Connects to
Red and blue Ethernet Back-end network interface cards (NICs) in each node Back-end switches
Green and yellow Ethernet Front-end NICs in each node Front-end switches
Purple Ethernet Back-end switches Each other
Black power Each node Two PDUs
Each back-end switch One PDU