The table below shows the tested limits for shock and vibration for an HCP system and its components where this information is available.
| Component | Operating shock | Non-operating shock | Operating vibration | Non-operating vibration |
|---|---|---|---|---|
| HCP system (not including storage components) | 20G, 6ms, half-sine | 33G, 11ms, half-sine, 3/eg axis | 0.2Grms on z axis, 2 minutes | 1.87Grms on 3 axes, 30 minutes |
| HCP G11 Node | 31G, 2.6ms, ±5%, shock pulse 20in/sec or 51cm/sec, bottom side | 71G (2ms) ±5%, shock pulse 35in/sec or 89cm/sec, 6 sides | 0.2Grms on z axis, 2 minutes | 1.87Grms on 3 axes, 30 minutes |
| Brocade ICX 6430 | IEC 68-2-36, IEC 68-2-6 | |||
| HP 4208VL | N/A | N/A | N/A | N/A |
| Brocade VDX 6740 | 20G, 11ms, half-sine | 44G, 15ms, square wave | 0.5G peak, 0.7Grms random, 5 to 500 Hz | 2.0G sine, 1.4Grms random, 5 to 500 Hz |
| Cisco Nexus 5548 | N/A | N/A | N/A | N/A |
| Cisco Nexus 5596 | N/A | N/A | N/A | N/A |
| Brocade 6510 | 20G, 6ms, half-sine | 33G, 11ms, half-sine, 3/eg axis | 0.5G sine, 0.5Grms random, 5 to 500Hz | 2.0G sine, 1.1Grms random, 5 to 500Hz |
| Cisco MDS 9148S | N/A | N/A | N/A | N/A |