Each personality module in a base enclosure has three LEDs that indicate the status of the module. These LEDs are located on the left on the top of the module, as shown in the figure below.
The table below describes these LEDs.
| LED | Color | State | Description |
|---|---|---|---|
| SAS expander A fault | Amber | Solid | SAS expander A in the personality module has a fault condition. |
| Blinking | N/A | ||
| Off | SAS expander A in the personality module is operating normally. | ||
| SAS expander B fault | Amber | Solid | SAS expander B in the personality module has a fault condition. |
| Blinking | N/A | ||
| Off | SAS expander B in the personality module is operating normally. | ||
| Personality module heartbeat/fault | Green or amber | Solid green | N/A |
| Blinking green | The personality module is operating normally. | ||
| Solid amber | The personality module has a fault condition. | ||
| Blinking amber | Beaconing is on for the personality module. | ||
| Off | The personality module has no power. |