Drive LEDs (S11 or S31 Node base enclosure and all expansion enclosures)

Content Platform S Series Node Help

Version
4.0.0
Audience
anonymous
Part Number
MK-HCPS027-02

Each data or database drive for an S Series Node has two color-coded LEDs, one blue and one amber. S Series Nodes don't use the blue LED.

The LEDs on data drives and on S11 or S31 Node database drives are located on the top of the drive at the end with the tab, as shown in the figure below.



The LEDs on S32 Node database drives are located at the bottom of the front of the drive case, as shown in the figure below.



The table below describes the amber LED.

LED Color State Description
Drive fault Amber Solid The drive has a fault condition.
Blinking Beaconing is on for the drive.
Off The drive is operating normally, and beaconing is off for the drive.