The tables below show the tested limits for shock and vibration for S Series Node base and expansion enclosures.
S11 and S31 Node base enclosure and all expansion enclosures
The measurements in the table below apply to fully populated enclosures (that is, enclosures that contain the applicable initial drive set and two capacity upgrade drive sets).
| Parameter | Value |
|---|---|
| Operating shock | 3.0 g, 11 ms per axis |
| Operating vibration | 0.18 Grms, 5Hz to 500Hz, 30 mins per axis |
| Non-operating shock | 20.0 g, 7 ms, 10 shock pulses (2 shocks per X axis and per Y axis in positive and negative directions; 2 shocks on Z axis in positive direction) (ISTA 3H) |
| Non-operating vibration | 0.54 Grms, 6 Hz to 200 Hz (ISTA 3E/3H) |
S32 Node base enclosure
| Parameter | Value |
|---|---|
| Operating shock | 5.0 g, 10 ms per axis |
| Operating vibration | 0.21 Grms, 5Hz to 500Hz, 30 mins per axis |
| Non-operating shock | 15.0 g, 10 ms, 10 shock pulses (2 shocks per X axis and per Y axis in positive and negative directions; 2 shocks on Z axis in positive direction) (ISTA 3H) |
| Non-operating vibration | 1.04 Grms 2 Hz to 200 Hz (ISTA 3E/3H) |