Responses returned by YKQRYDEV

The following describes the unique response items returned by YKQRYDEV. For details about response items common to each command, see Responses common to all CLI commands.

Response body

{ "servletKey":"USERID-01-aaaaaaaa",
  "ver":"0100",
  "appData":{
    "bcmVer":"099100",
    "vendor":"Hitachi Vantara, Ltd.",
    "rc":0,
    "bcmMsg":[
    ],
    "action":"submit",
    "cliname":"YKQRYDEV",
    "operands":"DEVN(A000)",
    "devInfo":{
      "SSID":"1122",
      "serialNum":"11111",
      "CUNum":"11",
      "CCA":"22",
      "cyls":3339,
      "hostStatus":"ONLINE",
      "DKC":{
        "model":"VSP5100",
        "microcode":"700000FF",
        "IFType":"3131",
        "PPInfo":"00000000"
      },
      "VOL":{
        "attr":"NORMAL"
      },
      "pair":{
        "TC":[
          {
            "pri":{
              "SSID":"1122",
              "serialNum":"11111",
              "CUNum":"11",
              "CCA":"22"
            },
            "sec":{
              "SSID":"1122",
              "serialNum":"11111",
              "CUNum":"11",
              "CCA":"22"
            },
            "state":"DUPLEX",
             "timestampMode":true,
             "diffManage":"D"
          }
        ],
        "SI":[
        ],
        "UR":[
        ]
      },
      "path":{
        "DKC":{
          "sec":{
            "model":"VSPG1500",
            "serialNum":"11111"
          },
          "pathGroup":[
            {
              "PATHID":"11",
              "path":[
                {
                  "status":"NO PATH",
                  "priPort":"11",
                  "secPort":"22"
                }
              ]
            }
          ]
        }
      },
      "PSN":{
        "physicalSerialNum":"11111",
        "LDKCNum":"0" 
      }
    }
  },
  "reused":false, "timeout":false
}

Key	Format	Description
`devInfo`^#9	object or undefined	Device object
`SSID`^#9	string	SSID of the volume
`serialNum`^#9	string	Storage system serial number of the volume
`CUNum`^#9	string	Control unit number of the volume
`CCA`^#9	string	Command control address of the volume
`cyls`^#9	string	Volume capacity (the number of cylinders)
`hostStatus`^#9	string	Status of host connection `ONLINE` `OFFLINE`
`DKC`^#9	object	Storage system object
`model`^#9	string	Storage system model `VSPG1000` `VSPG1500` `VSPF1500` `VSP5100` `VSP5200` `VSP5500` `VSP5600` `VSP5100H` `VSP5200H` `VSP5500H` `VSP5600H`
`microcode`^#9	string	DKCMAIN microcode version
`IFType`^#9	string	Interface version
`PPInfo`^#9	string	Information of installed program product
`vol`	object or undefined	Volume attribute object
`attr`^#1	string	Volume attribute `NORMAL` `JOURNAL` `COMMAND`
`cdev`	object or undefined	Command device object
`status`	string or undefined	Status of command device (`CDEV`)
`APID`	string or undefined	APID
`pair`	object or undefined	Copy pair object
`TC`	object array	Array of TrueCopy copy pair objects
`pri`	object	P-VOL object
`SSID`	string	SSID of P-VOL
`serialNum`	string	Storage system serial number of P-VOL
`CUNum`	string	Control unit number of P-VOL
`CCA`	string	Command control address of P-VOL
`sec`	object	S-VOL object
`SSID`	string	SSID of S-VOL
`serialNum`	string	Storage system serial number of S-VOL
`CUNum`	string	Control unit number of S-VOL
`CCA`	string	Command control address of S-VOL
`CT`	object	Consistency group object
`ID`^{#3 #10}	string or undefined	Consistency group ID
`openMF`^{#3 #10}	string or undefined	Use of the Open/MF Consistency Preservation function. `Y` `N`
`consLost`	string	Data inconsistency in the TrueCopy copy pair (`CONSLOST` status) `Y`: The copy process of the related FlashCopy^® was interrupted. `N`: Normal status
`fenceLevel`^#4	string or undefined	Fence level `NEVER` `STATUS` `DATA`
`freezeScpMode`^{#4 #5}	string or undefined	Freeze SCP `Y` `N`
`initPace`^#11	string or undefined	Copy pace `SLOW` `NORMAL`
`matchingPerCent`^{#6 #11}	number or undefined	Copy pair matching rate
`map`	string	Difference management unit `CYL` `TRK`
`path`	string	Status of path `Active` `Inactive`
`protectMode`^#5	string or undefined	Protect mode `PROTECT` `PERMIT`
`State`	string	Status of TrueCopy copy pair `PENDING (01)` `DUPLEX (02)` `SUSPOP (03)` `SUSPOP (04)` `SWAPPING (04)` `SUSPOP (05)` `SUSPCU (06)` `SUSPER (07)` `SUSPCU (08)` `SUSPER (09)` `SUSPOP (0A)` `MTIR (10)` `SUSPER (50)` `SUSPER (A0)`
`timestampMode`^#17	boolean or undefined	Timestamp transfer mode used by the TC ATTIME Suspend function `true`: Timestamp transfer mode is enabled `false`: Timestamp transfer mode is not enabled
`diffManage`^#17	string or undefined	Type of the differential-data management method `D`: Drives are used to manage differential data. `S`: Shared memory is used to manage differential data.
`SI`	object array	Array of ShadowImage copy pair objects
`pri`	object	P-VOL object
`SSID`	string	SSID of P-VOL
`serialNum`	string	Storage system serial number of P-VOL
`CUNum`	string	Control unit number of P-VOL
`CCA`	string	Command control address of P-VOL
`sec`	object	S-VOL object
`SSID`	string	SSID of S-VOL
`serialNum`	string	Storage system serial number of S-VOL
`CUNum`	string	Control unit number of S-VOL
`CCA`	string	Command control address of S-VOL
`AT`	object or undefined	ATTIME suspend object
`genID`^#12	string or undefined	Generation ID
`presetMode^#18`	string or undefined	The ATTIME Suspend function that was run `NORMAL`: NORMAL ATTIME suspend was performed. `TC`: TC ATTIME suspend was performed. `NONSUSPENDABLE`: A NORMAL ATTIME suspend or TC ATTIME suspend was run, but the suspension could not be performed due to a ShadowImage copy pair that cannot be suspended.
`status`	string	ATTIME status `Notset`: The ATTIME suspend time is not set. `PRESET`: The ATTIME suspend time is set but suspend has not been performed. `SUSPEND` `(TIMESTAMP)`: Suspend was performed because the ATTIME suspend time elapsed. `SUSPEND` `(TIMEOUT)`: Suspend was performed because a timeout occurred.
`SplitMode`^#19	string or undefined	Suspend mode that is to be used or was used by the ATTIME Suspend function (whether the S-VOL that is undergoing transition to the suspend status can be referenced or updated) `STEADY`: The S-VOL can be referenced or updated after copying has been completed. `QUICK`: The S-VOL can be referenced or updated even during copying.
`TCStatus`^#18	string or undefined	Status of the TrueCopy copy group when the ShadowImage copy group was suspended `DUPLEX`: All TrueCopy copy pairs were in the `DUPLEX` status and the S-VOL of the TrueCopy copy pairs was the P-VOL of ShadowImage copy pairs when the suspension was performed. `NOTIMESTAMP`: TrueCopy copy pairs were not in timestamp transfer mode. `UNEXPECTED`: Some TrueCopy copy pairs were not in the `DUPLEX` status when the suspension was performed. Alternatively, the S-VOL of some TrueCopy copy pairs was not the P-VOL of the ShadowImage copy pairs. If `presetMode` is not `TC`, the value is not output.
`time`^{#2 #12}	string or undefined	ATTIME suspend time (`yyyymmdd` `hh:mm:ss.nnnnnn`)
`tout`^#12	string or undefined	Timeout value (minutes)
`trem`^#12	string or undefined	Time remaining until timeout (minutes)
`pairCt`^#12	number or undefined	Number of copy pairs in the consistency group
`duplexCt`^#12	number or undefined	Number of Duplex copy pairs in the consistency group to which the specified device belongs
`pendingCt`^#12	number or undefined	Number of copy pairs made by full copy
`resyncCt`^#12	number or undefined	Number of Resync copy pairs in the consistency group to which the specified device belongs
`suspendErCt`^#12	number or undefined	Number of failure suspended copy pairs
`suspendOpCt`^#12	number or undefined	Number of suspended copy pairs
`transCt`^#12	number or undefined	Number of suspending copy pairs
`ATUR`	object or undefined	UR ATTIME suspend object
`rJnl`^#13	string or undefined	Remote journal group ID
`genID`^#13	string or undefined	Generation ID (hexadecimal number: `00`-`FF`)
`splitMode`^#13	string or undefined	Suspend mode used by the UR ATTIME Suspend function. (This indicates whether secondary volumes transitioning to the suspend status can be accessed or updated.) `STEADY`: Volumes can be accessed or updated after the copy operation is completed. `QUICK`: Volumes can be accessed or updated even while the copy operation is in progress.
`status`	string	ATTIME suspend status `Notset`: The ATTIME suspend time is not set. `PRESET`: The ATTIME suspend time is set, but suspend has not been performed. `SUSPEND (TIMESTAMP)`: Suspend was performed because the ATTIME suspend time elapsed. `SUSPEND (TIMEOUT)`: Suspend was performed because a timeout occurred. `SUSPEND (NOIO)`: Suspend was performed because no update journal was detected.
`SIStatus`^#13	string or undefined	ShadowImage copy group status `WAITING`: Suspend processing has not been started. `SUSPENDING`: Suspend processing is ongoing. `SUSPEND`: Suspend processing ended normally. `ERROR`: Suspend processing ended abnormally.
`URStatus`^#14	string or undefined	The status of the Universal Replicator copy group when the ShadowImage copy group is suspended. `DUPLEX`: When suspend was performed, all Universal Replicator copy pairs were in `DUPLEX` status. `UNEXPECTED`: When a suspend was performed, some Universal Replicator copy pairs were not in `DUPLEX` status.
`errorCode`^#13	string or undefined	Error code (hexadecimal number: `0000`-`FFFF`)
`time`^{#2 #13}	string or undefined	ATTIME suspend information (`yyyymmdd` `hh:mm:ss.nnnnnn`)
`tout`^#13	string or undefined	Timeout value since the command is issued (minutes)
`tout2`^#13	string or undefined	Timeout value since the ATTIME suspend time (minutes)
`trem`^#13	string or undefined	Time remaining until timeout (minutes)
`CTTime`^{#2 #13}	string or undefined	Consistency time for the Universal Replicator copy group at suspension (`yyyymmdd hh:mm:ss.nnnnnn`)
`CT`	object	Consistency group object
`ID`	string or undefined	Consistency group ID
`initPace`	string	Copy pace `SLOW` `NORMAL` `FAST`
`matchingPerCent`	number	Copy pair matching rate
`protectMode`	string	Protect mode `PROTECT` `PERMIT`
`state`	string	Status of ShadowImage copy pair `PENDING (01)` `DUPLEX (02)` `TRANS (03)` `SUSPOP (04)` `PENDING (05)` `SUSPER (06)` `SUSPVS (07)` `REVRSY (08)` `TRANS (09)`
`diffManage`^#17	string or undefined	Type of the differential-data management method `D`: Drives are used to manage differential data. `S`: Shared memory is used to manage differential data.
`UR`	object array or undefined	Array of Universal Replicator copy pair objects
`pri`	object	P-VOL object
`SSID`	string	SSID
`serialNum`	string	Storage system serial number
`CUNum`	string	Control unit number
`CCA`	string	Command control address
`sec`	object	S-VOL object
`SSID`	string	SSID
`serialNum`	string	Storage system serial number
`CUNum`	string	Control unit number
`CCA`	string	Command control address
`CT`	object	Consistency group object
`ID`	string	Master journal number
`subID`	string	Remote journal number
`status`	string	C/T status
`jnlTime`^#15	string or undefined	Consistency time acquired from the journal (TOD or disk controller time)
`svolTime`^#15	string or undefined	Consistency time acquired from the volume (TOD or disk controller time)
`time`^#15	string or undefined	Consistency time acquired in accordance with the storage system's system option mode (TOD or disk controller time)
`timerType`	string	Consistency group timer type `SYSTEM` `LOCAL` `NONE`
`errorLevel`^#7	string	Error level in Universal Replicator `GROUP` `VOLUME`
`exctgID`	string	EXCTG ID
`exctgRegistFlag`	string	EXCTG registration flag `0` `1` If the EXCTG function is applied, `1` is set only when the journal group that has the applicable volume has been registered in EXCTG.
`exctgRegistFlag2`^#8	string or undefined	EXCTG registration flag for pair target journal group `0` `1` If the EXCTG function is applied, `1` is set only when the journal group that has the pair target volume of the applicable volume, has been registered in EXCTG.
`matchingPerCent`^#6	number or undefined	Copy pair matching rate
`pathID`^#7	string	Path group ID
`protectMode`	string	Protect mode `PROTECT` `PERMIT`
`state`	string	Existence of Universal Replicator copy pair `PENDING` `(01)` `DUPLEX` `(02)` `SUSPOP` `(04)` `SWAPPING(04)` `SUSPOP` `(05)` `SUSPCU` `(06)` `SUSPER` `(07)` `SUSPCU` `(08)` `SUSPER` `(09)` `TRANS` `(60)` `TRANS` `(61)` `HOLD` `(70)` `HOLDER` `(71)` `HOLDTRNS` `(72)` `HOLDER` `(73)` `NODELTA` `(74)`
`diffManage`^#17	string or undefined	Type of the differential-data management method `D`: Drives are used to manage differential data. `S`: Shared memory is used to manage differential data.
`path`^#9	object	Logical path object
`CU`^#16	object array or undefined	Array of inter-control unit logical path objects
`type`	string	Path type `ESCON` `FIBRE`
`sec`	object	Secondary storage system object
`model`	string	Model of secondary storage system `VSPG1000` (VSP G1000, VSP G1500, or VSP F1500) `VSP5000` (VSP 5100, VSP 5200, VSP 5500, VSP 5600, VSP 5100H, VSP 5200H, VSP 5500H, or VSP 5600H)
`serialNum`	string	Serial number of secondary storage system
`SSID1`	string	SSID1 of secondary storage system
`SSID2`	string	SSID2 of secondary storage system
`SSID3`	string	SSID3 of secondary storage system
`SSID4`	string	SSID4 of secondary storage system
`P2S`	object array	Array of physical path objects in the inter-control unit logical path
`status`	string	Status of physical path `NO PATH` `ESTABLISHED` `INIT FAILED` `TIME OUT` `NO RESOURCES AT PRI` `NO RESOURCES AT SEC` `SERIAL# MISMATCH` `CONFIG ERROR`
`priPort`	string	Initiator port number (for ESCON, link address)
`secPort`	string	Target port number (for ESCON, link address)
`secCUNum`	string	Secondary control unit number
`DKC`^#16	object or undefined	Inter-disk controller logical path object
`sec`	object	Secondary storage system object
`model`	string	Model of secondary storage system `VSPG1000` (VSP G1000, VSP G1500, or VSP F1500) `VSP5000` (VSP 5100, VSP 5200, VSP 5500, VSP 5600, VSP 5100H, VSP 5200H, VSP 5500H, or VSP 5600H)
`serialNum`	string	Serial number of secondary storage system
`pathGroup`	object array	Array of physical path objects in the inter-disk controller logical path of the corresponding path group ID
`pathID`	string	Path group ID
`path`	object array	Array of physical path objects
`status`	string	Status of physical path `NO PATH` `ESTABLISHED` `INIT FAILED` `TIME OUT` `NO RESOURCES AT PRI` `NO RESOURCES AT SEC` `SERIAL# MISMATCH` `CONFIG ERROR`
`priPort`	string	Initiator port number
`secPort`	string	Target port number
`PSN`	object or undefined	PSN object
`physicalSerialNum`	string	Physical DKC serial number
`LDKCNum`	string	Logical disk controller number

#1: When the emulation type of the journal volume is OPEN-V, NORMAL is displayed.

#2: Displayed in GMT.

#3: Information is output for TrueCopy with consistency group ID specified.

#4: Information is output for TrueCopy.

#5: This is not output for a PPRC copy pair.

#6: If copy pairs are in the suspend status, the displayed values correspond to the amounts written to the P-VOL after the suspension, and do not include the amounts written to the S-VOL. When these copy pairs are resynchronized, the values might change, because the values corresponding to the amounts written to the P-VOL and S-VOL are adjusted when the differential copy is performed.

#7

When the copy type is Universal Replicator and the corresponding attribute settings are supported, information is displayed.

This is not output if information could not be acquired.

#8: Information is output for P-VOL when the status for the Universal Replicator copy pair is PENDING or DUPLEX.

#9: This is output if the value of the rc key is 0.

#10: This is not output if the group is not a consistency group.

#11: This is not output for S-VOLs.

#12: This is not output if the NORMAL ATTIME suspend time or TC ATTIME suspend time is not set.

#13: This is not output if the UR ATTIME suspend time is not set.

#14: This is not output if the UR ATTIME suspend time is not set or the suspend function has not been run.

#15: This is not output for P-VOLs.

#16: This is not output if the PATH parameter is not specified.

#17: This is not output if the version of Business Continuity Manager is earlier than 9.9.0 or the volume of the storage system used does not support the function that can get the differential-data management type.

#18: This is not output if the status key is Notset or PRESET.

#19: This is not output if the status key is Notset.