Format
[OLDVRM=VRM] [PFX=prefix] [BCMLINK=suffix-for-library-names] [BCMPROC=suffix-for-library-names] [BCMEXEC=suffix-for-library-names] [INMBLNK=member-ID] [OUTMBLNK=member-ID] [INMBAPF=member-ID] [OUTMBAPF=member-ID] [INMBLPA=member-ID] [OUTMBLPA=member-ID] [INMBTSO=member-ID] [OUTMBTSO=member-ID] [INMBSVC=member-ID] [OUTMBSVC=member-ID] YKSVCNO=SVC-number [PROCDSN=dataset-name] [PARMDSN=dataset-name] [INMBSYM=member-ID] [OUTMBSYM=member-ID] [HOSTID=host-ID] [LPFX=prefix-1[.prefix-2]] [LINFVSN=volume-serial-number] [{LICKDS=license-key-dataset-name|LICKYC=key-code}] [LOGPUT={LOGR|SAM}] [SYSLOG={YES|CONSOLE|NO}]
Parameters
- OLDVRM=VRM
- Specify the version of Business Continuity Manager that is installed. Specify this parameter only if you are upgrading Business Continuity Manager.
- If you specify this parameter, the system references the following libraries and cancels the environment settings of the installed Business Continuity Manager instance.
- prefix.OLDVRM-parameter-value.suffix-for-library-names
- The format of VRM is as follows:
- PFX=prefix ~ <PREFIX character string><<HDSYK>>
- Specify a prefix for the target library names and distribution library names.
- BCMLINK=suffix-for-library-names ~ <symbolic name><<HDSYLNKT>>
- Specify a suffix for the load library name for LINKLIB.
- BCMPROC=suffix-for-library-names ~ <symbolic name><<HDSYPRCT>>
- Specify a suffix for cataloged procedure library names.
- BCMEXEC=suffix-for-library-names ~ <symbolic name><<HDSYEXET>>
- Specify a suffix for REXX Exec library names.
- INMBLNK=member-ID ~ <member name string>
- Specify the last two characters of the name of the currently active PROGxx parmlib member. If you omit this parameter, the LNKLST concatenation processing will not be performed and the record to be added to the PROGxx parameter will be output.
- OUTMBLNK=member-ID ~ <member name string>
- Specify the last two characters of the name of the PROGxx parmlib member to be created or updated during LNKLST concatenation. If you specify the INMBLNK parameter and omit the OUTMBLNK parameter, the LNKLST concatenation processing will not be performed and the content of the changed PROGxx parameter will be output.
- INMBAPF=member-ID ~ <member name string>
- Specify the last two characters of the name of the currently active PROGxx parmlib member. If you omit this parameter, the registration of APF authorization will not be performed and the record to be added to the PROGxx parameter will be output.
- OUTMBAPF=member-ID ~ <member name string>
- Specify the last two characters of the name of the PROGxx parmlib member to be created or updated during the registration of APF authorization. If you specify the INMBAPF parameter and omit the OUTMBAPF parameter, the member will not be created or updated and the content of the changed PROGxx parameter will be output.
- INMBLPA=member-ID ~ <member name string>
- Specify the last two characters of the name of the currently active LPALSTxx parmlib member. If you omit this parameter, the LPALST concatenation processing will not be performed and the record to be added to the LPALSTxx parameter will be output.
- OUTMBLPA=member-ID ~ <member name string>
- Specify the last two characters of the name of the LPALSTxx parmlib member to be created or updated during LPALST concatenation. If you specify the INMBLPA parameter and omit the OUTMBLPA parameter, the member will not be created or updated and the content of the changed LPALSTxx parameter will be output.
- INMBTSO=member-ID ~ <member name string>
- Specify the last two characters of the name of the currently active IKJTSOxx parmlib member. If you omit this parameter, the YKCONMSG command will not be registered and the record to be added to the IKJTSOxx parameter will be output.
- OUTMBTSO=member-ID ~ <member name string>
- Specify the last two characters of the name of the IKJTSOxx member to be created or updated when the YKCONMSG command is registered. If you omit this parameter, the member will not be created or updated and the content of the changed IKJTSOxx parameter will be output.
- INMBSVC=member-ID ~ <member name string>
- Specify the last two characters of the name of the currently active IEASVCxx parmlib member. If you omit this parameter, the user SVC will not be registered and the record to be added to the IEASVCxx parameter will be output.
- OUTMBSVC=member-ID ~ <member name string>
- Specify the last two characters of the name of the IEASVCxx parmlib member to be created or updated when the user SVC is registered. If you omit this parameter, the member will not be created or updated and the content of the changed IEASVCxx parameter will be output.
- YKSVCNO=SVC-number ~ <3-digit number>((200 to 255))
- Specify the SVC number to be assigned to the user SVC. For details, see Registering a user SVC.
- INMBSYM=member-ID ~ <member name string>
- Specify the last two characters of the name of the currently active IEASYMxx parmlib member. If you omit this parameter, the environment variables will not be set and the record to be added to the IEASYMxx parameter will be output.
- OUTMBSYM=member-ID ~ <member name string>
- Specify the last two characters of the name of the IEASYMxx parmlib member to be created or updated when the environment variables are set. If you omit this parameter, the member will not be created or updated and the content of the changed IEASYMxx parameter will be output.
- HOSTID=host-ID ~ <2-digit hexadecimal number>((00 to 1F))
- Specify the host ID to be specified for the &YKCMDIF system symbol. If you omit this parameter, the value of the &YKCMDIF system symbol will not be updated. For details, see Setting Business Continuity Manager environment variables.
- LPFX=prefix-1[.prefix-2] ~ <PREFIX character string>
- Specify prefix 1 and prefix 2 of the license information dataset. These prefixes will be specified for the &YKLCNSE and &YKLCNS2 system symbols. If you omit this parameter, the values of the &YKLCNSE and &YKLCNS2 system symbols will not be updated. If you omit prefix 2, the value of the &YKLCNS2 system symbol will not be updated. For details, see Setting Business Continuity Manager environment variables.
- LINFVSN=volume-serial-number ~ <1 to 6 alphanumeric characters>
- Specify the serial number of the volume to which the license information dataset is to be assigned.
- LICKDS=license-key-dataset-name
- Specify the license key dataset name. If you specify this parameter together with the LICKYC parameter, the LICKDS parameter takes priority. If you omit both the LICKDS and LICKYC parameters, the license key will not be registered.
- LICKYC=key-code ~ <75-digit alphanumeric characters>
- Specify the key code of the license key. If you specify this parameter together with the LICKDS parameter, the LICKDS parameter takes priority. If you omit both the LICKDS and LICKYC parameters, the license key will not be registered.
- LOGPUT={LOGR|SAM}
- Specify whether to use the system logger service that is to be specified for the &YKLOGPT system symbol. If you omit this parameter, the value of the &YKLOGPT system symbol will not be updated. For details, see Setting Business Continuity Manager environment variables.
- SYSLOG={YES|CONSOLE|NO}
- Specify whether to output execution log data of the CLI command that is to be specified for the &YKSYSLG system symbol. If you omit this parameter, the value of the &YKSYSLG system symbol will not be updated. For details, see Setting Business Continuity Manager environment variables.